• Home
  • 500 Denier Mil-Spec CORDURA® Nylon Fabric MultiCam ® Camo (Sold per Yard)

500 Denier Mil-Spec CORDURA® Nylon Fabric MultiCam ® Camo (Sold per Yard)

(0) No Reviews yet


Sold Per Yard

Item# CTD500-Mulitcam

Click here to order samples

This fabric is made to meet the physical requirements of MIL-DTL-32439.

MultiCam® camouflage is a single camouflage pattern designed to help the wearer hide in varied environments, seasons, elevations, and light conditions. It was designed to address the real-world need for concealment in different environments, with one basic kit of gear. While there are many great location-specific patterns, MultiCam® is designed to work well across a very broad range of environmental conditions when observed in both the visual and near infrared (NIR) spectrums.

Made in the USA to mil-spec DTL32439, Type III, Class 3. Always first quality fabric. Some key requirements:

3.8 Physical Requirements

Mil-Spec Physical Requirements
CharacteristicWeightYarns per inchBreaking StrengthAbrasion ResistanceHydrostatic Resistance
oz/sq ydMinimumLB (min)
MinMaxWarpFillingWarpFillingMinimum CyclesWater, cm
Type III, Class 37.08.0483530022570035

3.16 Toxicity The finished fabric shall not present a health hazard and shall show compatibility with prolonged, direct skin contact when tested as specified in 4.4.5. Chemicals recognized by the Environmental Protection Agency (EPA) as human carcinogens shall not be used.



500 Denier Nylon Camouflage Fabric Finished Width - 59/60 inches Polyurethane coating DWR finish Finished Weight - approximately 7.1 oz/sq yd

Nominal Width (Inches)59-60 inch (150-152cm)
Nominal Fabric Weight (Oz/ Sq Yd)8
Sales Unit Yard
Availability Standard Item
Roll Size 75
Thickness (Inches)0.018
Coating Polyurethane
DWR Finish Yes
Breathability None
Care InstructionCORDURA-Care
Suggested NeedleUniversal 80/12
Thread SuggestionBonded Nylon or all Polyester, T45 to T70
Country of OriginUSA

Information and documents provided on this website are provided "as is" without warranty of any kind, either expressed or implied, including limitation warranties of merchantability, fitness for a particular purpose, and non-infringement. Rockywoods Fabrics LLC uses reasonable efforts to include accurate and up-to-date information on this Web site; it does not, however, make any warranties or representations as to its accuracy or completeness. Rockywoods Fabrics LLC periodically adds, changes, improves, or updates the information and documents on this website without notice.


Invista's Care Instructions for CORDURA® Nylon fabric

CORDURA® Nylon fabrics are very durable and you can wash and dry them at home.

  • Apparel: Wash on low temperature setting using mild detergent. Either air dry or dry on low setting. Do not bleach.
  • Fabric softener is not recommended as it affects the function of the water repellent applied to some fabrics, but often times it can diminish a static problem. There are various brands of softeners with different chemistries and some will help static at the expense of water repellency, and others will have no effect on either. No softener will damage the basic fabric and will come off in the next wash
  • Upholstery/Backpacks/Luggage: Soil may be removed with spray cleaner or detergent and water. Do not bleach.
  • Oil or grease should first be treated with a dry cleaning solvent followed by a spray cleaner or detergent and water.

Some CORDURA Nylon fabrics have a durable water repellent (DWR) finish on the front face of the fabric. The DWR helps the fabric shed water and stains. Over a period of time this DWR finish will wear off and needs to be replenished. If your fabric stops beading water on the front face you can replenish this finish with a protectant called ReviveX® Water Repellent for Outerwear. It comes in a cleaner and spray on form.

Ratings & Reviews

No reviews available

Be the first to Write a Review