Your Cart is Empty
View Cart
Hardware & Zippers
Plastic/Metal, Thread & Other Hardware
Buckle Hardware
Cord & Cord Locks
Cleaners & Protectants
Hook Hardware
Metal Hardware
Other Hardware
Repair Kits
Seam Sealers & Seam Tapes
Sewing Thread
Narrow Fabrics
Close Outs
New Items
  Freesole® Urethane Formula Shoe Repair
Freesole® Urethane Formula Shoe Repair
Fabric Part Number : 10410
Samples Available Below,
  Roll Size  :  yard roll
Coating : 
Waterproof Resistance : 
Durable Water Repellent Finish : 
Breathability :  Breathability
The Breathability of a fabric measures the ability of the fabric to allow water vapor to move through the fabric. Measured in grams of water per square meter of fabric per 24 hour period.

Sales Unit: Each
Pantone Color : 
Nominal Fabric Width : 
Nominal Fabric Thickness : 
Nominal Shipping Weight : 2  oz per Each
Nominal Shipping Weight
The Nominal Shipping Weight describes the weight of the item per Shipping Unit, and accounts for the width of the fabric, packaging or unusual size issues. See Nominal Fabric Weight for a measurement of the weight of the item in oz per square yard.
Stock Availability : Standard Item Stock Availability
The Stock Availability describes the ability to reorder or restock the item.
  • Standard Item This item is generally in stock, or available in 3-5 days if we temporarily are out.
  • Limited Quantities This item was bought as a close-out, manufacturer's over-run or in some other fashion which makes re-ordering this item not likely.
  • Discontinued Item This item has been discontinued by either us or the manufacturer and we will not be re-stocking it.
  • Special Order This item is generally not stocked but is available in 3-5 days for off-the-shelf items, to 3 weeks for printed fabrics, to 10 weeks for customer made or dyed fabrics..

Quantity Available: Unlimited, manufactured regularly
Nominal Fabric Weight :  oz per sq yard
Nominal Fabric Weight in GSM To convert oz/sq yard to gm/sq m, multiply by 33.906
Care Instructions : 
Suggested Needle : 
Suggested Thread : 

Freesole® Urethane Formula Shoe Repair
Item# 10410

Please note that we cannot ship Freesole via any air carrier

Freesole® is a patented urethane rubber repair system designed to restore and rebuild all types of footwear. Unaffected by heat or solvents, FREESOLE cures to a flexible thermoset rubber product providing superior adhesion, wear resistance, flexibility and waterproofing. The highly concentrated formula has minimal shrinkage: thick repairs can be made with only one permanent application. Ideal for worn heels, toes, sole and ski delaminations and more. FREESOLE will not separate with repeated flexing. (1 oz)

Freesole® Urethane Formula Shoe Repair

Directions For Use:


PREP: Roughen damaged area with sandpaper or wire brush. Use cloth to clean area with Cotol-240™ Cure Accelerator/Pre-Cleaner, paint thinner or lighter fluid. Repeat cleaning for best adhesion.

TAPE: For thick repairs at edge of sole or heel, place removable tape (cellophane or masking) around edge to form a dam. Double thickness of tape works best.

APPLY: Squeeze FREESOLE Urethane Formula Shoe Repair onto area to be repaired, level with a stick, toothpick or knife. Keep repair facing up and level until FREESOLE becomes solid. Remove tape.

DRY: Allow thin repairs to cure overnight; thick repairs 24-48 hours. Longer times may be needed in dry climates or times of low humidity such as cold winter days.

FOR 2 HOUR DRY TIME: Mix in Cotol-240™ Cure Accelerator/Pre-Cleaner.


  1. Dull area by roughening with sandpaper, or by cleaning with FREESOLE Pre-Cleaner, acetone or nail polish remover.
  2. Mask off area to be coated, including sole edge if coating is to be extended to it. Keep area level and upright during application and curing, as for example, by cradling shoe in crumpled newspaper or box.
  3. Squeeze FREESOLE onto center or area, allow to self level, then spread to uniform thickness with toothpick. If FREESOLE flows onto tape, spread back towards center. (High curvature areas may be easier when coated in sections.)
  4. Remove tape after FREESOLE dries to a soft solid. Allow to cure overnight.


  • Roughen smooth surfaces. Clean surfaces to be joined as noted above. Apply FREESOLE to both surfaces. Allow to dry 15 minutes. Join and hold (clamp or tape) surfaces together overnight.


  • Clean area as noted above. Apply FREESOLE along seam or between sole and upper directly from tube or with toothpick.


  • Roughen and clean damaged area as noted above. Use removable tape to create a backing. Apply FREESOLE to area and ?" beyond. Keep level and upright until cured. Remove tape.

Useful Tips

  • TO SPEED UP DRY TIME, use cure accelerator. If cure accelerator is not used, apply FREESOLE then place object into a high-humidity environment. For example, an open box covered with a damp cloth.

CLEAN-UP: To remove FREESOLE from hands, use cloth soaked in paint thinner, nail polish remover or 99% isopropyl alcohol.

$7.49 per Each
Tell a Friend